Media cabinet in oak with walnut handles. Doors closed

Right door opened

Door slides back into the cabinet

Both doors opened & doors retracted

Touch to open drawers dor CD & DVD storage

Clsoe up of the bespoke walnut handles

Close up of the top of the cabinet showing the inlaid walnut strip

.

Media cabinet in oak with walnut handles. Doors closed

This Oak media cabinet was designed to hold Plasma TV on the top, Hi Fi equipment on right hand side & DVD player & satellite receiver on left side.

• Overall dimensions of cabinet shown 1200mm wide x 485mm deep x 640mm high
• usable internal width of cabinet 500mm wide on left and 500mm on right
• One or both of the 'touch to open' drawers can be removed at a later date if more equipment is required
• the drawers have been made to hold DVD's & CD's. The left hand drawer stops short of the back of the cabinet by 135mm to allow for a socket board to fit behind. Both drawers can be fully removed by releasing the catches under the drawers
• The 10mm ground, polished & bevelled edged glass shelves, are held in place with locking shelf supports to eliminate vibration. 100mm high spacings for shelves on right hand side, 155 high spacings on left hand side. Additional holes can be drilled for alternative configurations
• Isolating feet can be fitted underneath the cabinet (behind the plinth) in four corners to compensate for unlevel floors, they also act as a solid support to eliminate vibration. The levellers are adjusted through a 10mm hole in the base of the cabinet

Guideline price for design 11027 - £1750

Locking glass shelf support

• For Ø 5 mm hole
• For 6/8/10 mm glass thickness
• Zinc alloy tightening element
• Zinc alloy with transparent silicone glass support   

Sketch showing the glass shelf support