Cabinet hardware, cabinet drawer lights, TV lifts

We only use the finest quality hardware for our cabinets. Our main suppliers are Hettich and Hafele, who are the suppliers of high quality engineered components to the trade

All of our drawers are fitted with concealed dynamic drawer runners. Choose touch to open for a 'no handle' look. Soft-close if handles are required.

Drawer runners have a ball bearing mechanism, silent, easily detachable and adjustable in height.

NEW Optional drawer illumination provided by battery operated remote control LED lights

• Built-in sensor with 50-100 mm detector range, activated by drawer opening/closing or by hand movement in front of sensor
• To save battery power, the light will turn off automatically after approx. 20 seconds if drawer is left open. Simply move hand in front of sensor to turn on again
• For surface mounting
• LED strip contains 4 diodes
• Colour temperature: Cool white 6,400 K
• Light output: 15 Lm
• Powered by 4x AAA batteries
• Aluminium alloy, satin chrome finish

• Special slow down system, once you begin to open the door it continues to open gently and completely by itself
• Alignment:
- Align to nearby doors using the rotary knob placed on the piston base plate
- To change the opening and closing time of the door adjust the position of the piston base plate within the slot of the side bracket
• Metal supports nickel-plated for quick assembly

Flap hinge used in conjunction with the flap stay pictured above

For one-piece flaps made of wood or with aluminium frame
• 90º or 100º opening angle
• Fitting for screw fixing, flap clips onto pre-mounted mounting
bracket
• Hinges not required
• Flap locks in any position
• With soft close

• Height and side adjustment +1/-1.5 mm, tilt and holding power adjustment facility
• Fitting: nickel plated steel, cover cap: grey RAL 9006 plastic

We use touch to open or soft close concealed hinges depending on whether handles are required. Hinges are easily adjusted to take up any movement after the cabinet is put in place. When cabinets are manufactured in our workshop, the doors are hung & adjusted on a completely flat & level base. We appreciate that once cabinets are delivered and put in their final position, on carpet or uneven floors, the doors may need some minor adjustment in the future. The hinges we use can be simply adjusted up/down, left/right and forward/back.

Pivot sliding doors
Doors open & then slide back into the cabinet
High quality ball bearing runners give smooth operation for opening & retracting doors

- Some of our customers have expressed a need for locking cabinet doors, especially where expensive hi-fi equipment is installed. We have sourced a suitable lock for use on handle free doors

• Externally invisible lock, the magnetic key can be kept in a safe place out of the reach of children
• Maximum door thickness 25 mm
• Consists of:
- 2x Locks and plungers
- 2x Striking plates
- 1x Magnetic key
- 12x Ø 4 mm pan head screws
- 2x Adhesive pads

Quality track system for sliding cabinet doors 19mm thick. We opt for top & bottom track recessed

• Application:
Bottom rolling system for cupboard, wardrobe or similar domestic and light commercial doors, single or multiple track runs. Ideal for serving hatch type applications
• Range:
- Max. door weight 25 kg
- Max. door height 1500 mm
- Max. door width 1000 mm
• Recommended door construction
- Min. door thickness: 12 mm solid
- Width: one third height minimum to maintain door operation stability
- Handle: Just over half height for best results
• Fixing:
Top channel soffit fixed. Floor track recessed or surface-mounted. Side fixing rollers suit 12 mm doors minimum. Close clearances need to be maintained to ensure correct operation. Position rollers close to edge of door
• Sets are supplied complete with fixing screws
• Jason complete fittings sets are available for two doors. Jason two door component pack also available for when two additional doors are added

TV lift 470 Full remote control for TV's no higher than 460mm (ideally suited for end of bed TV cabinets)

• These quiet, stable, remote controlled TV lifts are especially designed for flat screen TVs
• 460 mm travel, to accommodate small (up to 30") flat screen TVs
• installation depth of just 70 mm
• With both remote and manual switch operation
• Radio wave remote control, not infrared, so will work through closed cabinet - no need for glass
• Max./Min. size of TV screen - governed by lift travel 460 mm: max. TV size 460 mm high
• Weight capacity is 50 kg

TV Lift 380 Full remote control• With both remote and manual switch operation
• Radio wave remote control, not infrared, so will work through closed cabinet - no need for glass
• Max./Min. size of TV screen - governed by lift travel 750 mm; max. TV size 750 mm high.
• Weight capacity is 100 kg
• VESA fixings: 600 x 400, 600 x 200, 600 x 100, 400 x 400, 400 x 200, 400 x 100, 300 x 300, 200 x 200, 200 x 100
• Vertical brackets can be adjusted widthways across the frame for different TV's, max. outer width of the two horizontal rails is 762 mm
• Curved top frame is adjustable and is used to push up the lid of the cabinet - i.e. to stop the TV hitting the lid as it rises and closes
• Black painted steel

• H x W x D: 645 x 120 x 65 mm & shallow depth of 72mm
• 240V small electric plasma TV lift
• With a 760 mm travel
• Remote controlled with RF
• Fits the following VESA:
- 50 x 50
- 200 x 200
- 300 x 300
• Black

• H x W x D: 750 x 762 x 40 mm
• 240V electric plasma TV lift
• With a 1000 mm travel
• Requires a build-in height of 750 mm
• Featured with anti-squeeze protection
• Remote controlled with RF
• Fits the following VESA:
- 200 x 200
- 300 x 300
- 400 x 100
- 400 x 400
- 600 x 200 & 600 x 400

TV Lift 375 Push to open mechanical TV lift
• Suitable for screens weighing 2.5kg - 6.5kg, up to 22” (diagonal measurement) and up to 450mm high
• Travel 538mm
• Swivel +/- 112.5 degrees
• Raises to fully extended position in under 2 seconds
• With damper and weights to control movement
• Wire management and cable control kit included
• 1 x weight pack included, additional packs available, see chart
• Choice of 18× tilt or fixed VESA brackets (not included)
• Versatile design for lifting any item within weight and size limitations
• Fixing hardware included
• RoHS compliant
• Black painted steel
• Dims: 720 x 195 x 73.4mm