|
Prices are shown
at the bottom of the page. Delivery may be additional
depending on location
The Cambridge
cantilevered radiator was originally designed to be suspended above floor level, but
looks equally good floor standing. Shown
here in dark grey satin finish with Chartham square grille
- removable magnetic
front panel for access to valves
-
Cantilevered design (suspended off floor) or floor standing
- choice of grille panels
-
Choice of paint finishes available
Prices are shown below . Delivery may be additional
depending on location
To calculate cost,
measure your radiator from valve to valve, see example and price bands below. ALL RADIATOR
COVERS ARE MADE TO MEASURE.
Example - if your radiator measures 51" wide look at the
48" to 59" wide price section, cost will be £460 in white or £500 in wood
finish. Add £60 if anodised grille is required.When
ordering we will require the following dimensions
Dimension A Height of radiator from floor
Dimension B Width of radiator from valve to valve
Dimension C Overall height of finished radiator cabinet,
normally finishes 1.75" higher than A
Dimension D Depth of radiator from wall to front face of
radiator
Dimension E Skirting board height, we cut cabinet to fit
over this
Special instructions, if you have sockets, door jambs, extra pipework that we
need to accomodate, we need to know about them |
| STYLE/width |
Up to 36" wide |
36"
to 48" wide |
48" to
60" wide |
60" to 72" wide |
72" to 84" wide |
84" to 96" wide |
| |
up to 914mm
wide |
914 to 1219mm
wide |
1219 to 1524mm
wide |
1524 to 1828mm
wide |
1828 to 2133mm
wide |
2133 to 2438mm
wide |
| Cambridge in painted finish eg
white, old english white(10B15) , buttermilk (10C31) |
£420 |
£460 |
£520 |
£560 |
£600 |
£640 |
| Cambridge Choice of
oak,mahogany,pine, beech etc in a range of finishes |
£480 |
£520 |
£580 |
£620 |
£660 |
£700 |
| All of the
above supplied with standard grille - to view grille designs - click here |
| Extra cost for anodised gold or
silver grille grille |
£50 |
£60 |
£70 |
£80 |
£90 |
£100 |
|
Our solid brass grille is hand-made to measure from 3mm
solid brass bar which is carefully half-jointed at each intersection & fixed to solid
brass mesh. Each intersection is then drilled & riveted together using honeycomb
rivets. The grille panel is then screwed to the inside of the radiator cabinet with a
rebated wooden strip.
To calculate the cost of the grille you multiply the width of the radiator
including valves, by the height of the radiator from the floor to the top x £0.088 to
calculate the cost. Example - 46" wide x 28" high x £0.088 = £113.34. |
 |
|
