Studio fires - open fronted fire (no glass front) available in 3 different sizes with various trim options

Opening sizes required
Studio 1 fire opening required 660mm wide x 334mm high x 312mm deep (optional gather available)
Studio 2 fire opening required 860mm wide x 334mm high x 312mm deep (detachable gather included in cost)
Studio 3 fire opening required 1250mm wide x 334mm high x 312mm deep
(fixed gather included in cost)
**dimensions shown above are for the studio edge. If using with the profil, bahaus, profil or link frames a 5mm space must be left around the front edge of the appliance. All dimensions are approximate, refer to manufacturers detailed installation instructions.

Technical
Studio 1 heat input Natural gas 6.9kw, output 1.72kw.
Studio 2 heat input 8.8kw, output 2.2kw
Studio 3 heat input 13.2kw, output 3.3kw

Studio fire box has black metal back & sides and a polished stainless steel firebed. Optional black granite back & side panels are available at a small additional cost. White stones fuel bed only

interior.jpg (60822 bytes)

  • open fire
  • Single ribbon of living flame
  • White pebble fuel bed
  • Ultra-contemporary styling
  • Choice of frame finishes (Anthracite or Polished Stainless Steel)
  • Allows flat screen TVs to be mounted above the fire if desired
  • Operation via Sequential remote control (ignition and flame height) or via electronic touch pad discreetly located in the fire’s front plate
  • Suitable for Class 1 chimneys (min flue size 175mm diameter)
  • ALSO AVAILABLE WITH A POWERFLUE KIT FOR HOMES WITHOUT CHIMNEYS SEE POWERFLUE SECTION ON LEFT HAND MENU

studio1edge.jpg (34186 bytes)

studio3edge.jpg (24829 bytes)
Studio edge open (no trim) - for a minimalist look plaster/render to edge of appliance
Top picture shows edge 1, lower picture shows edge 3
Overall dimensions

Studio 1  660mm wide x 334mm high
Studio 2  860mm wide x 334mm high
Studio 3 1250mm wide x 334mm high

CLICK ON IMAGE LEFT FOR MORE INFORMATION
For prices call us on freephone 0500 808007

Built-in Fires » Studio 1 Profil Gas Fire Studio profil open - Choice of anthracite or polished stainless steel trim
Overall dimensions of the trim
Studio 1  750mm wide x 426mm high x 13mm deep
Studio 2  950mm wide x 426mm high x 13mm deep
Studio 3 1340mm wide x 426mm high x 13mm deep

CLICK ON IMAGE LEFT FOR MORE INFORMATION
For prices call us on freephone 0500 808007

Built-in Fires » Studio 1 Bauhaus Gas Fire Studio bahaus open - choice of anthracite or polished stainless steel trim
Overall dimensions of the trim

Studio 1  764mm wide x 439mm high x 28mm deep
Studio 2  964mm wide x 439mm high x 28mm deep
Studio 3 1354mm wide x 439mm high x 28mm deep

CLICK ON IMAGE LEFT FOR MORE INFORMATION
For prices call us on freephone 0500 808007

Built-in Fires » Studio 2 Steel Gas Fire Studio steel open - trim available in graphite (shown) bronze or iridium silver
Overall dimensions of the trim
Studio 1  1120mm wide x 675mm high x 13mm deep
Studio 2  1320mm wide x 675mm high x 13mm deep
Studio 3 1710mm wide x 675mm high x 13mm deep

CLICK ON IMAGE LEFT FOR MORE INFORMATION
For prices call us on freephone 0500 808007

Built-in Fires » Studio 1 Link Gas Fire Studio link open
Overall dimensions of the trim
Studio 1  1332mm wide x 491mm high x 23mm deep

Studio 2  1532mm wide x 491mm high x 23mm deep
CLICK ON IMAGE LEFT FOR MORE INFORMATION
For prices call us on freephone 0500 808007

Built-in Fires » Studio Andes, Inca and Kepler Studio Andes, Inca & Kepler open
Andes - walnut centre with oak edges
Inca - Walnut quarters
Kepler - solid walnut

Overall dimensions of the trim
Studio 1  1332mm wide x 497mm high x 21mm deep
CLICK ON IMAGE LEFT FOR MORE INFORMATION
For prices call us on freephone 0500 808007

Built-in Fires » Studio Firenza Gas Fire Studio Firenza open (2 sizes available)
Black granite one piece fascia
Overall dimensions of the fascia
Studio 1  1200mm wide x 600mm high x 20mm deep

Studio 2  1500mm x 600mm x 20mm
For prices call us on freephone 0500 808007

Click here for more technical information & opening sizes

Built-in Fires » Studio Pienza Gas Fire Studio Pienza open (2 sizes available)
Honed limestone one piece fascia
Overall dimensions of the fascia
Studio 1  1200mm wide x 600mm high x 20mm deep

Studio 2  1500mm x 600mm x 20mm
For prices call us on freephone 0500 808007

Click here for more technical information & opening sizes

Built-in Fires » Studio Sienna Gas Fires Studio Sienna open (2 sizes available)
Travertine marble one piece fascia
Overall dimensions of the fascia
Studio 1  1200mm wide x 600mm high x 20mm deep

Studio 2  1500mm x 600mm x 20mm
For prices call us on freephone 0500 808007

Click here for more technical information & opening sizes

 

 

Studio closed fires - glass fronted fire available in 2 different sizes,  frameless or with various trim options

Fireplace opening required
Studio 1 closed fire opening required 760mm wide x 440mm high x 350mm deep approx
Studio 2 closed fire opening required 960mm wide x 440mm high x 350mm deep approx
Studio 3 closed fire opening required 1350mm wide x 440mm high x 350mm deep approx (balanced flue only available on this model)
**dimensions shown above are for the studio edge. If using with the profil, bahaus, steel or profil frames a 5mm space must be left around the front edge of the appliance. Dimensions are approximate - refer to manufacturers detailed fitting instructions.
Technical specification
Studio 1 For conventional chimney - Gas input 6.9kw output 4.85kw 70% efficient
Studio 1 balanced flue – input 6.9kw output 5.1kw 81% efficient
Studio 2 For conventional chimney – Gas input 8.8kw output 6.1kw 70% efficient
Studio 2 balanced flue – gas input 8.8kw output 6.8kw 81% efficient
Studio 3 balanced flue - gas input 9kw output 7.3kw 81% efficient

  • models are available for installation into a class 1 chimney or class ll (5") flue. Can also be installed with a 5" twinwall flue
  • balanced flue model also available for homes without chimneys - requires false chimney breast construction
  • Single ribbon of living flame
  • White pebble fuel bed or log fuel bed (pebble only on studio 3)
  • Operation via Sequential remote control (ignition and flame height) with secondary wall switch control (no mains electricity required)

STUDIOLOG.jpg (51948 bytes)

New for 2008 Season - All Studio glass fronted fires for conventional chimney or balanced flue are available with white pebble fuel bed or log fuel bed. (Excludes studio 3 balanced flue which is white stones fuel bed only)

studio1edge.jpg (34186 bytes)

studio3edge.jpg (24829 bytes)
Studio edge closed (glass fronted) (no trim) - for a minimalist look plaster/render to edge of appliance
Top picture shows edge 1, lower picture shows edge 2
Log or white stone fuel bed, black or beige interior (excludes studio 3)
Overall dimensions
Studio 1  760mm wide x 440mm high appx
Studio 2  960mm wide x 440mm high appx
Studio 3 (balanced flue only) 1350 wide x 440 high approx
CLICK ON IMAGE LEFT FOR MORE INFORMATION
For prices call us on freephone 0500 808007

Built-in Fires » Studio 1 Profil Gas Fire

studio3closed.jpg (37560 bytes)
Studio profil closed (glass fronted)- Choice of anthracite or polished stainless steel trim
Log or white stone fuel bed, black or beige interior (excludes studio 3)
Overall dimensions of trim
Studio 1  846mm wide x 520mm high x 13mm deep
Studio 2 1036mmwide x 510mm high x 13mm deep
Studio 3 (balanced flue only) 1426 wide x 510 high approx (Shown in lower picture)
CLICK ON IMAGE LEFT FOR MORE INFORMATION
For prices call us on freephone 0500 808007

Built-in Fires » Studio 1 Bauhaus Gas Fire

STUDIOBAHAUSLOG.jpg (53109 bytes)

Studio bahaus closed (glass fornted) - choice of anthracite or polished stainless steel trim
Log or white stone fuel bed, black or beige interior (excludes studio 3)
Overall dimensions of trim
Studio 1  850mm wide x 524mm high x 28mm deep
Studio 2  1050mm wide x 524mm high x 28mm deep
Studio 3 (balanced flue only) 1440 wide x 524 high approx
CLICK ON IMAGE LEFT FOR MORE INFORMATION
For prices call us on freephone 0500 808007

Built-in Fires » Studio 2 Steel Gas Fire Studio steel closed (glass fornted) - trims are available in graphite, bronze and iridium silver
Log or white stone fuel bed, black or beige interior (excludes studio 3)
Overall dimensions of trim

Studio 1  1120mm wide x 675mm high x 25mm deep
Studio 2  1350mm wide x 675mm high x 25mm deep
Studio 3 (balanced flue only) 1740 wide x 675 high approx
CLICK ON IMAGE LEFT FOR MORE INFORMATION
For prices call us on freephone 0500 808007

Built-in Fires » Studio Icon Gas Fire Studio Icon closed (glass fornted) - balanced flue ONLY
Log or white stone fuel bed, black or beige interior
Overall dimensions of trim

880mm wide x 440mm deep x 2143mm high
Designed for easy installation - graphite finish
For prices call us on freephone 0500 808007

 

 

Gazco studio 22 glass fronted fire (balanced flue only)
NEW FOR 2008

 

Built-in Fires » Studio 22 Gas Fire The Studio 22 Steel glass fronted balanced flue fire
The Steel trim is available in Anthracite (shown), bronze or Iridium
Opening required to fit the fire is approx 977 high x 423 wide x 264 deep
Overall size of trim when fitted is 1320 high x 675 wide x 13 deep

Rear exit or top exit balanced flue configurations available
This fire is also available without a trim (Studio edge 22) for a frameless look

For prices call us on freephone 0500 808007


Built-in Fires » Studio 22 Gas Fire The Studio Profil 22 glass fronted balanced flue fire
The Profil trim is available in Anthracite or polished stainless steel (shown)
Opening required to fit the fire is approx 977 high x 423 wide x 264 deep
Overall size of trim when fitted is 950 high x 426 wide x 13 deep

Rear exit or top exit balanced flue configurations available
This fire is also available without a trim (Studio edge 22) for a frameless look

For prices call us on freephone 0500 808007


Built-in Fires » Studio 22 Gas Fire The Studio Bahaus 22 glass fronted balanced flue fire
The Bahaus trim is available in Anthracite or polished stainless steel (shown)
Opening required to fit the fire is approx 977 high x 423 wide x 264 deep
Overall size of trim when fitted is 964 high x 439 wide x 28 deep

Rear exit or top exit balanced flue configurations available
This fire is also available without a trim (Studio edge 22) for a frameless look

For prices call us on freephone 0500 808007


Gazco E studio (glass fronted) fire
Photo shows E-Studio with steel frame (shown in graphite also available in iridium silver)
The E-Studio fires are the perfect coupling of ultra high efficiency glass-fronted E-box technology and the Studio's stunning ribbon flame effect. Available in a variety of different frames to suit both contemporary and traditional installations, the E-Studio can be used for hole-in-the-wall installations (with the Steel or Designio frames) or for hearth mounting (with the Arts, Designio, Dimension, Evolution or Progress frames). To see the range of trims & frets available - click here A very versatile and efficient fire!

 

E-Studio Steel Gas Fire Gazco E studio (glass fronted) fire
Suitable for class I chimneys or class II flues
A balanced flue version is also available for homes without chimneys


Frame dimensions in millimeters 850 wide x 670 high x 31 deep
Fireplace opening required is 410mm wide x 560mm high x 190 deep for conventional flue version & 232 deep for balanced flue version
FOR PRICE & AVAILABILTY CONTACT US ON FREEPHONE 0500 808007

The Futura Glass fronted fire

 

 Built-in Fires » Futura Gas Fire

FOR PRICE & AVAILABILTY CONTACT US ON FREEPHONE 0500 808007

Available to use with the following fire units
  • Fuel bed - EStudio: White stones. Fuel bed - Ebox: coals or pebbles
  • Black glass finish
  • Command Controls: Manual or upgrade to Standard or Programmable remote control
  • E-Box: 3.8kW heat output | 76% efficiency
  • E-Box Balanced Flue: 3.52kW heat output | 86% efficiency
  • E-Studio: 3.1kW heat output | 72% efficiency
  • E-Studio Balanced Flue: 3.52kW heat output | 82% efficiency
  • suitable for class 1 & 2  chimneys or Balanced Flue option

    This fire fits a standard fireplace opening of 16"(410mm) wide x 22"(560mm) high. Depth is 235mm for balanced flue models & 250mm for conventional chimney models.

Overall dimensions of trim are 520mm wide x 1127mm high x 38mm deep


The Fusion Glass fronted fire

 

Built-in Fires » Fusion Gas Fire

 

FOR PRICE & AVAILABILTY CONTACT US ON FREEPHONE 0500 808007

Available to use with the following fire units
  • Fuel bed - EStudio: White stones. Fuel bed - Ebox: coals or pebbles
  • Anthracite or Iridium finish
  • Command Controls: Manual or upgrade to Standard or Programmable remote control
  • E-Box: 3.8kW heat output | 76% efficiency
  • E-Box Balanced Flue: 3.52kW heat output | 86% efficiency
  • E-Studio: 3.1kW heat output | 72% efficiency
  • E-Studio Balanced Flue: 3.52kW heat output | 82% efficiency
  • suitable for class 1 & 2  chimneys or Balanced Flue option

    This fire fits a standard fireplace opening of 16"(410mm) wide x 22"(560mm) high. Depth is 235mm for balanced flue models & 250mm for conventional chimney models.

Overall dimensions of trim are 520mm wide x 1127mm high x 38mm deep


Gazco  Riva fires - GAZCO RIVA FIRES ARE AVAILABLE FOR CONVENTIONAL CHIMNEYS AND AS BALANCED FLUE FIRES - superb hole in the wall solution, a very high quality british made product offering superb efficiency, quality and style at sensible prices. All Gazco Riva fires are glass fronted, and are extremely efficient, typical values are 6.8kw input and 4.8kw output. (NO HEARTH REQUIRED)
We offer a nationwide FREE delivery service on this product.
If you have a class I chimney you will require the conventional chimney version.
If you do not have a chimney, but you have an outside wall, you can use a balanced flue fire with the standard balanced flue kit. A vertical balanced flue kit is also available. Telephone our technical department if you require clarification.

Remote control options, standard remote adjusts flame height. Thermostat remote controls flame height, has a built in thermostat and can be programmed to turn the fire on and off up to twice a day.

Fireplace openings required (width x height x depth)
Riva 53 - 540x665x350
Riva 67 - 670x530x350
Riva 70 (Balanced flue only- 700x705x350

Electric riva 67 - 665x535x205
For overall dimensions see individual descriptions below
For current prices, call us on freephone 0500 808007

Built-in Fires » Riva Spectrum Gas Fire New model for 2007/8
Riva Spectrum hole in wall GAS fire
Available for conventional chimney or as a balanced flue option
Optional standard remote or thermostat/timer remote controls
No hearth is required.
Available in three sizes
Overall dimensions (width x height x depth of trim)
67 measures 880x590x50
53 measures 760x729x50
70 (balanced flue only) measures 910x765x50
For fireplace opening sizes and more info click here

esprit.jpg (87018 bytes) New model Riva Esprit 67 hole in wall GAS fire
Available for conventional chimney or as a balanced flue option
Optional standard remote or thermostat/timer remote controls
No hearth is required
Outer dimensions are 925mm wide x 684mm high x 70 deep
Fire fits opening 668 mm wide x 530mm high x 350mm deep
For fireplace opening sizes and more info click here

Built-in Fires » Riva 67 Avanti Gas Fire

Riva avanti 67
Available for conventional chimney or as a balanced flue option
Optional standard remote or thermostat/timer remote controls
No hearth is required.
Available in three sizes
Overall dimensions (width x height x depth of trim)
67 measures 825x699x73
53 measures 650x819x120 (vertical curve)
70 (balanced flue only) measures 870x880x75
An electric riva avanti 67 is also available
For fireplace opening sizes and more info click here


Built-in Fires » Riva 67 Vetro Gas Fire Riva vetro 67 the trim is available in white glass or black (anthracite) glass
Available for conventional chimney or as a balanced flue option
Optional standard remote or thermostat/timer remote controls
No hearth is required
Outer dimensions are 1025 mm wide x 650 mm high x 92 mm deep
Fire fits opening 668 mm wide x 530mm high x 350mm deep
For fireplace opening sizes and more info click here

Built-in Fires » Designio Gas Fire

Riva designio hole in wall GAS fire
Available for conventional chimney or as a balanced flue option
Optional standard remote or thermostat/timer remote controls
No hearth is required.
Two colours available, iridium silver & graphite grey
Available in two sizes
Overall dimensions (width x height x depth of trim)
67 measures 775x603x68
53 measures 650x735x68
An electric riva designio 67 is also available
For fireplace opening sizes and more info click here

Built-in Fires » Riva Profil 2 Gas Fire

Riva profil
Available for conventional chimney or as a balanced flue option
Optional standard remote or thermostat/timer remote controls
No hearth is required.
Available in three sizes
Overall dimensions (width x height x depth of trim)
67 measures 710x590x38
53 measures 720x726x21
An electric riva profil 67 is also available
For fireplace opening sizes and more info click here

 

GAZCO LINEA RANGE - NEW PRODUCT FROM GAZCO - BALANCED FLUE FIRE FITS DIRECTLY ONTO ANY OUTSIDE WALL - NO NEED FOR FALSE CHIMNEY BREAST - NO HEARTH REQUIRED -
For current prices, call us on freephone 0500 808007
Wall Mounted Fires » Linea Designio Gas Fire Linea designio fire is a glass fronted, balanced flue fire that features unique 'non-fuel' flame effect, fully sequential battery powered remote control - no need for permanent pilot. Around 82% efficient with a 4.3kw output. Depth of fire 175mm.NO HEARTH REQUIRED.
Designio trim is available in graphite grey or iridium silver
Measures 775mm wide x 620mm high x 170mm deep
THIS FIRE IS ON LIVE DISPLAY IN OUR SHOWROOM
For current prices, call us on freephone 0500 808007
Wall Mounted Fires » Linea Vetro Gas Fire
Linea vetro fire is a glass fronted, balanced flue fire that features unique 'non-fuel' flame effect, fully sequential battery powered remote control - no need for permanent pilot. Around 82% efficient with a 4.3kw output. Depth of fire 170mm. NO HEARTH REQUIRED - trim is in frosted glass
Measures 1050w x 650h x 150mm deep
For current prices, call us on freephone 0500 808007
Wall Mounted Fires » Linea Steel Gas Fire Linea steel fire is a glass fronted, balanced flue fire that features unique 'non-fuel' flame effect, fully sequential battery powered remote control - no need for permanent pilot. Around 82% efficient with a 4.3kw output. Depth of fire 170mm. NO HEARTH REQUIRED - Steel trim available in graphite grey or iridium silver
Measures 1050w x 650h x 167 deep
For current prices, call us on freephone 0500 808007